Joe Yannie
August 1st, 2003, 10:33 AM
Alan 788 cyclocross frame/fork/headset/seatpost.Bottom Bracket
(un-72x113)
56x56( decals removed )
frame and fork are in good shape, some chainsuck marks(small) and a
small piece is missing from the front cable stop but does not affect
performance.
Headset is a Mavic and is smooth,low maint. and has a locking feature(no
loosening here!)
Seatpost is a generic 25.0 single bolt with setback.
132.5 spacing so it fits road and mt. hubs
Will Include Michelin Sprint tires if wanted.
Raced it for a year but never used the bike a whole lot.
$170
M-950 XTR front wheel- Sun 0 degree xc(black) dt db spokes brass nips
> $30
The goal of ultra lightweight construction is fully achieved in the SLR.
Just 185g with nothing sacrificed in terms of technical specifications.
Thanks to a combination of features including a carbon shell, padding. The
SLR XP offers extra padding and Tubular vanox rails.
I used this saddle on the rollers only. There is a sharpie mark on the
rails from marking my position.
Difficult to distinguish from new. Looks like the SLR gelflow but does not
have the gel.
$55
I also have 7speed gripshift and Avid 2.0 canti levers if interested for that "project" we all have.
pjyannie@hotmail.com.org remove .org to reply
(un-72x113)
56x56( decals removed )
frame and fork are in good shape, some chainsuck marks(small) and a
small piece is missing from the front cable stop but does not affect
performance.
Headset is a Mavic and is smooth,low maint. and has a locking feature(no
loosening here!)
Seatpost is a generic 25.0 single bolt with setback.
132.5 spacing so it fits road and mt. hubs
Will Include Michelin Sprint tires if wanted.
Raced it for a year but never used the bike a whole lot.
$170
M-950 XTR front wheel- Sun 0 degree xc(black) dt db spokes brass nips
> $30
The goal of ultra lightweight construction is fully achieved in the SLR.
Just 185g with nothing sacrificed in terms of technical specifications.
Thanks to a combination of features including a carbon shell, padding. The
SLR XP offers extra padding and Tubular vanox rails.
I used this saddle on the rollers only. There is a sharpie mark on the
rails from marking my position.
Difficult to distinguish from new. Looks like the SLR gelflow but does not
have the gel.
$55
I also have 7speed gripshift and Avid 2.0 canti levers if interested for that "project" we all have.
pjyannie@hotmail.com.org remove .org to reply