PDA

View Full Version : For Sale Redline Cyclo-X Frame and Parts


kmax
June 17th, 2009, 08:53 AM
Selling a 57cm Redline Cyclo-X frame in good condition. There is a single dent in the top tube but it is just aesthetic.

Includes installed shimano (105?) square taper bottom bracket, Ritchy Logic Crank set and rings (36x53?) Cane Creek headset (less then 1 year old), a Kinesis Aluminum fork and Ultegra front derailleur. There is a basic stem and handlebar, Truvativ seat post and your choice of either a WTB Rocket V or an Intense branded saddle if desired. Also has a set of cantilever brakes mounted that are ok but not the best for stopping power.

I'm also contemplating selling the set of Mavic CXP22's I had on the bike though I wouldn't mind them as a spare set for the road bike. They're pretty bomb proof wheels laced to some Shimano 105 hubs with an Ultegra 9speed cassette, nearly brand new and currently have a set of Maxxis Raze tires mounted that still have plenty of life left. Let me know if you're interested in those also.

Unfortunately the LX rear derailleur I had on this bike is replacing my busted XTR from Big Bear this past weekend and the shifters were a loaner set that I am returning so they are not available.

The GF is moving in to my small house so I need to make at least a little bit of space for her and her things here so this bike has to go. Also, as you can see from the saddle hieght this was always a bit big for me, especially for doing any cross racing on it.

I'm asking $250/obo for the frame and listed components and $175/obo for the lightly used wheelset, cassette and tires. I can send more detailed pictures if you'd like, just need to find my SD card.

http://lh5.ggpht.com/_BLFheSQVkWA/SUXUJfQSl1I/AAAAAAAADRM/CDvApcQ3OfE/s512/CIMG1224.JPG

http://lh5.ggpht.com/_BLFheSQVkWA/SUXUDo7dlKI/AAAAAAAADRE/ZbdRUpZAgZI/s512/CIMG1223.JPG

chowderbutt
June 17th, 2009, 09:30 AM
isnt the cyclocross rear wheel a different spacing than your road wheelset?

kmax
June 17th, 2009, 09:37 AM
I'd assume so, but I'm also under the impression that spacing can be changed fairly easily. Am I wrong in that assumption?

crack monkey
June 17th, 2009, 10:12 AM
Most 'cross bikes are 130mm like a road bike. Some of the steel bikes are 132.5 so you can use either. Not sure you can respace an aluminum frame.

chowderbutt
June 17th, 2009, 10:24 AM
darn,

I was interested in the frame using a 135 spaced rear wheel I have.

kmax
June 17th, 2009, 10:32 AM
Most 'cross bikes are 130mm like a road bike. Some of the steel bikes are 132.5 so you can use either. Not sure you can respace an aluminum frame.

I meant the wheel itself could be respaced pretty easily...?

crack monkey
June 17th, 2009, 11:38 AM
Yes, the wheel can probably be respaced without much effort.

Or, the frame might have enough flex that it's a non-issue. 5mm is less than 1/5 inch - not a whole lot.

kmax
June 18th, 2009, 01:00 PM
Wheels are going.

$150 for wheelset, tires included if you want them. + $25 for Ultegra 9speed cassette if you want that.

$200 for the frame and parts though we can talk price if you think you don't want the parts.

C'mon people! Help me show my girlfriend I can really make space and make sacrifices! :thumbsup:


Selling a 57cm Redline Cyclo-X frame in good condition. There is a single dent in the top tube but it is just aesthetic.

Includes installed shimano (105?) square taper bottom bracket, Ritchy Logic Crank set and rings (36x53?) Cane Creek headset (less then 1 year old), a Kinesis Aluminum fork and Ultegra front derailleur. There is a basic stem and handlebar, Truvativ seat post and your choice of either a WTB Rocket V or an Intense branded saddle if desired. Also has a set of cantilever brakes mounted that are ok but not the best for stopping power.

I'm also contemplating selling the set of Mavic CXP22's I had on the bike though I wouldn't mind them as a spare set for the road bike. They're pretty bomb proof wheels laced to some Shimano 105 hubs with an Ultegra 9speed cassette, nearly brand new and currently have a set of Maxxis Raze tires mounted that still have plenty of life left. Let me know if you're interested in those also.

Unfortunately the LX rear derailleur I had on this bike is replacing my busted XTR from Big Bear this past weekend and the shifters were a loaner set that I am returning so they are not available.

The GF is moving in to my small house so I need to make at least a little bit of space for her and her things here so this bike has to go. Also, as you can see from the saddle hieght this was always a bit big for me, especially for doing any cross racing on it.

I'm asking $250/obo for the frame and listed components and $175/obo for the lightly used wheelset, cassette and tires. I can send more detailed pictures if you'd like, just need to find my SD card.

http://lh5.ggpht.com/_BLFheSQVkWA/SUXUJfQSl1I/AAAAAAAADRM/CDvApcQ3OfE/s512/CIMG1224.JPG

http://lh5.ggpht.com/_BLFheSQVkWA/SUXUDo7dlKI/AAAAAAAADRE/ZbdRUpZAgZI/s512/CIMG1223.JPG

kmax
June 21st, 2009, 04:23 PM
Just in case, here are some better shots of the wheels. They're in near new condition as you cans see from the pictures.

http://lh4.ggpht.com/_BLFheSQVkWA/Sj1Nx4UXhqI/AAAAAAAAEsc/ntyjJeVmc2U/s512/CIMG1795.JPG

http://lh4.ggpht.com/_BLFheSQVkWA/Sj1N3zjz7aI/AAAAAAAAEso/I1qOfbFVl34/s512/CIMG1798.JPG

http://lh3.ggpht.com/_BLFheSQVkWA/Sj1Nm3TyXKI/AAAAAAAAEsQ/PRCKs0WMhsg/s512/CIMG1792.JPG

http://lh6.ggpht.com/_BLFheSQVkWA/Sj1NXHxAaSI/AAAAAAAAErg/ix3c0KigJGU/s512/CIMG1787.JPG

kmax
June 21st, 2009, 04:24 PM
And, more shots can be seen here: http://lh6.ggpht.com/_BLFheSQVkWA/Sj1NXHxAaSI/AAAAAAAAErg/ix3c0KigJGU/s512/CIMG1787.JPG