SS Fixie Crank Cheapish

[tonyfromdc]

Looking for a cheap single ring crankset for a city fixie project. Hopefully less then $50. I'd like it to be shorter arms (165 ish or less) but I'm not picky.

Hook me up.

-tony

[Dirt]

Looking for a cheap single ring crankset for a city fixie project. Hopefully less then $50. I'd like it to be shorter arms (165 ish or less) but I'm not picky.

Hook me up.

-tony
Ebay may be your best bet if you don't find any locally. Might not get below 50... but you might.

Good luck.

[walsh]

Harris has Bulletproof (http://www.sheldonbrown.com/harris/cranks/130-single.html) 140-170mm square taper BMX cranks for 40 bones . . . that's always been in the back of my mind for a commuter build.

[jabberwocky]

I've got a bontrager crank laying around that I'm not using. It was the stock crank on my old Fillmore. Its Isis, and I have a matching BB. I think it has a 46 tooth ring, but I'd have to check.

I'll let it go real cheap if it works for you.

[oldskoolbiker]

I've got some Truvativ Holzfeller Crank arms (no rings) and BB I'll sell for $30. You can use that for Single Ring. They are 170mm.

Probably overkill for what you need it for though. The BB I have will work with 68 and 73mm shells.

EDIT: I do have a new 38T single ring if you want one that big that I can throw in for $15.

[tonyfromdc]

I've got a bontrager crank laying around that I'm not using. It was the stock crank on my old Fillmore. Its Isis, and I have a matching BB. I think it has a 46 tooth ring, but I'd have to check.

I'll let it go real cheap if it works for you.

It might work. I have to check what type of BB threading the Vainquir it's going on has.

[tonyfromdc]

I've got some Truvativ Holzfeller Crank arms (no rings) and BB I'll sell for $30. You can use that for Single Ring. They are 170mm.

Probably overkill for what you need it for though. The BB I have will work with 68 and 73mm shells.

EDIT: I do have a new 38T single ring if you want one that big that I can throw in for $15.

That might work too. Gotta, measure the BB width and threads tonight.

Now, if I could just figure out how to get the cotter pin cranks off.

[allroy]

http://store.somafab.com/paketrackcrank.html

I think Tom still has some BulletProof track cranks in stock, dunno what length or price.
http://wheelandsprocket.com/itemdetails.cfm?id=7126

Ben's has some nice cranks, check out Andel and Sinz
http://www.benscycle.com/

Maybe try Phuc again if he's out...

[tonyfromdc]

68 mm English.

[oldskoolbiker]

68 mm English.

What I have will work.

[sourceofdenial]

Also there are some here: http://serotta.com/forum/showthread.php?t=55927