Parts Give Away

[GM2006]

PLEASE DISREGARD... ALL PARTS HAVE FOUND NEW HOMES.


I've been storing some of my lightly used parts, thinking I may build another bike or two. But that's not likely to happen any time soon. So here are some parts you're welcome to have if you can use them, and can pick them up at my McLean home in the next week:

Answer ProTaper carbon riser bar (about 3 years' use) - GONE

Easton Monkey Lite XC carbon riser bar (2 years' use) - GONE

Fox Vanilla Float R shock - GONE

27.2x300 alloy road seat post - GONE

Shimano BB-ES70 73 bottom bracketS - GONE

Saddle (Schwinn hybrid) - GONE

Stem - Thomson Elite 15dx130mmx25.4 - GONE

Seat post - Thomson Elite 27.2x330 setback - GONE

[VFDRider]

Is the Fox Vanilla Float still available? Please PM me -

[rmac]

dibs on Easton Monkey Lite XC carbon riser bar (2 years' use)

Thomson Elite stem 15dx130mmx25.4

Thomson Elite 27.2x330 setback seat post

I'll put some cash in the MORE coffer.

Thanks, Rick - will pm now.

[rciracing]

I'll take the Answer carbon bar.

[starcitymtb]

I'm in on the Fox Vanilla R Shock please... THanks!

[starcitymtb]

What the crap? I can't edit my posts!

What size is that shock? I am thinking that it might not work...

[GM2006]

Here's more info... http://www.cambriabike.com/shopexd.asp?id=62747&page=FOX%20RACING%20SHOX%20FLOAT%20 R%20AIR%20SHOCK%201999


Measures 7and 7/8 inches from center of upper bolt hole to center of lower bolt hole.

[mjbrox]

I've been storing some of my lightly used parts, thinking I may build another bike or two. But that's not likely to happen any time soon. So here are some parts you're welcome to have if you can use them, and can pick them up at my McLean home in the next week:

Fox Vanilla Float R shock - Available

27.2x300 alloy road seat post - Available

Shimano BB-ES70 73 bottom brackets (2) - Available

Saddles (2) - Available

Answer ProTaper carbon riser bar (about 3 years' use) - Spoken for

Easton Monkey Lite XC carbon riser bar (2 years' use) - Spoken for

Stem - Thomson Elite 15dx130mmx25.4 - Spoken for

Seat post - Thomson Elite 27.2x330 setback - Spoken for

you know, I have frame, cranks and some other stuff.

Maybe we could put together a bike and donate it to TFK?

[starcitymtb]

Here's more info... http://www.cambriabike.com/shopexd.asp?id=62747&page=FOX%20RACING%20SHOX%20FLOAT%20 R%20AIR%20SHOCK%201999


Measures 7and 7/8 inches from center of upper bolt hole to center of lower bolt hole.

Yes it will fit but I think I will pass on to another lucky MORE member who might need one. I have a newer one that has been giving me trouble but I will probably rebuild instead.

I was more interested in your riser bars but looks like those are taken. Thanks for checking that out for me though!

[VFDRider]

Hey, I PM'ed you again -

[mefrider]

my son had his hardtail stolen down at CNU this fall, which accelerated his "build a fixie" schedule...he has a couple of bikes he bought cheap on craigslist and is working on. He could likely use a seatpost, riser bar and maybe a bottom bracket (or two). Is anything still available? I work in Tysons and could swing by during lunch or after work tomorrow?